Kia Seltos: Smart Cruise Control (SCC) / SCC operation

Contents:

• Operating conditions for basic function

Operating conditions for basic function

Basic function

Smart Cruise Control operates when the following conditions are satisfied:

• The gear is in D (Drive).

• Your driving speed is within the operating speed range.

  5~110 mph (10~180 km/h): when there is no vehicle in front.

  0~110 mph (0~180 km/h): when there is a vehicle in front.

• ESC or ABS is on.

Smart Cruise Control does not operate under the following conditions:

• The driver's door is opened.

• Engine RPM is high.

• The EPB is applied.

• ESC or ABS is actively controlling the Kia Seltos.

• FCA brake control is operating.

NOTICE

When the Kia Seltos is stopped behind another vehicle, the driver can turn on Smart Cruise Control while the brake pedal is pressed.

Operating conditions for Acceleration Assist

Overtaking Acceleration Assist operates when the turn signal indicator is activated to the left on a left-hand drive vehicle, or to the right on a right-hand drive vehicle, while Smart Cruise Control is operating and the following conditions are met:

• Your driving speed is above 40 mph (60 km/h).

• A vehicle is detected in front of your vehicle.

Overtaking Acceleration Assist does not operate under the following conditions:

• The hazard warning flasher is on.

• Vehicle speed is being reduced to maintain distance from the vehicle ahead.

WARNING

• When the turn signal indicator is activated to the left on a left-hand drive vehicle, or to the right on a right-hand drive vehicle, while a vehicle is ahead, the Kia Seltos may accelerate temporarily. Always pay close attention to traffic, lane position, and road conditions.

• Regardless of the driving direction used in your country, Overtaking Acceleration Assist may operate when its conditions are satisfied. When using this function in a country with a different driving direction, always check the road and surrounding traffic carefully.