Owner's library Kia Seltos Manuals Owner's manual pages, service notes, maintenance references and practical Kia Seltos help in one clean library.

Kia Seltos reference pages

Manuals, maintenance notes and quick owner help.

Find Kia Seltos operating instructions, warning light explanations, service information and owner guidance without digging through a full PDF.

Kia Seltos: Emission Control System / Exhaust Emission Control System

Contents:

Catalytic Converter Description and Operation

Description
•
The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx).
•
Carbon monoxide, hydrocarbons and nitrogen oxide in exhaust gas are converted into less hazardous substances through the chemical reaction of oxidation reduction.

Emission Control System — Exhaust Emission Control System / Catalytic Converter / Description and Operation / Description illustration

Emission Control System — Exhaust Emission Control System / Catalytic Converter / Description and Operation / Description illustration

Catalytic Converter Removal and Installation

Removal
Caution    
To prevent burns due to the high heat, work when the temperature of the engine and the surrounding area is sufficiently low.
Warm-up Catalytic Converter (WCC)
1.
Remove the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
Underbody Catalytic Converter (UCC)
1.
Catalytic converter & center muffler assembly.
(Refer to Engine Mechanical System - "Muffler")
Installation
Warm-up Catalytic Converter (WCC)
1.
Install the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
Underbody Catalytic Converter (UCC)
1.
Install the catalytic converter & center muffler assembly.
(Refer to Engine Mechanical System - "Muffler")

Other information:

Kia Seltos SP2 (2021-2026) Service Manual: Alternator On Vehicle Inspection

On Vehicle Inspection Electrical Specified Value Inspection (Using the Voltmeter and Ammeter) 1. Voltage Drop Test Of Alternator Output Wire This test is to check the wiring condition between the alternator B terminal and the battery ( + ) terminal by using the voltage drop of the wiring.