Contents:
Description and Operation
Head-Up Display (HUD) System displays various information on the windshield glass which minimizes the driver’s
eye movement to enhance safety and convenience.
Information provided by HUD
| 1. |
Drive information : Vehicle speed, Drive mode
|
| 2. |
Turn by Turn navigation information, road signs, over speed.
|
| 3. |
Safety warning lamp : Smart Cruise Control (SCC), Lane Keeping Assist (LKA), Blind-Spot Collision Warning
(BCW)
|
Component Description
| 1. |
Head-Up Display (HUD) : Output various vehicle system information on windshield glass via CAN
communication.
|
| 2. |
HUD ON/OFF Switch
Turn ON/OFF the HUD via the side crash pad switch.
|
| 3. |
Illumination Sensor : It is equipped with bidirectional (A : vertical, B : horizontal) sensor. HUD
brightness is controlled depending on horizontal measurement (ambient brightness).
|
–
|
Built-in bidirectional illumination sensor
|
|
If illumination sensor measurement could not be detected, HUD will not be displayed. Check for
normal operation of illumination sensor before inspecting HUD.
|
|
| 4. |
Windshield glass : Windshield glass exclusive for Head-Up Display is built in with double image removal
film.
|
•
|
Use of window tinting film on windshield glass may decrease image quality.
|
|
•
|
Image may be distorted or seem dark if driver wears polarized sunglasses.
|
|
|
When replacing front windshield glass, always replace with exclusive windshield glass for Head-Up
Display (HUD). Otherwise, the Head-Up Display (HUD) images may overlap.
|
|
Troubleshooting
Item
|
Symptoms
|
Check List
|
Detail
|
Components
|
Lighting
|
|
–
|
Lighting brightness not automatically controlled (no difference between day and night)
|
|
|
–
|
Check the lighting control
|
|
–
|
Check the ambient light sensor operation
|
|
–
|
Check the CAN communication
|
|
|
–
|
Check the lighting control in the AVNT USM → If working, HUD has no problem.
|
|
–
|
Check the ambient light sensor operation
→ If the ambient light sensor works, check the communications (CGW ↔ HUD)
|
|
Illumination sensor CGW Cluster
|
Adjustment function
|
|
|
–
|
Check the mirror movement when IG ON or IG OFF
(Parking position)
|
|
|
–
|
If the step motor does not work when IG ON or IG OFF → The step motor in HUD fails
|
|
–
|
If the step motor in HUD works when IG ON or IG OFF → Check the CAN communications (AVNT ↔ HUD)
|
|
AVNT
|
Head Up Display (HUD) Unit On Vehicle Inspection
| 1. |
The Head-Up Display (HUD) can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
|
| (2)
|
S/W Management : Controlling other features including system option setting and zero point
adjustment.
(S/W Management → Head-Up Display → HUD Calibration)
|
|
Refer to the KDS screen for operating conditions and details.
|
|
Head Up Display (HUD) Unit Terminal Function
| Connector and Terminal Function |
Connector A
|
Terminal
|
Function
|
Terminal
|
Function
|
|
|
1
|
-
|
7
|
C-CAN (High)
|
2
|
Battery (+)
|
8
|
C-CAN (Low)
|
3
|
IG 1
|
9
|
-
|
4
|
-
|
10
|
HUD switch
|
5
|
M-CAN (High)
|
11
|
Ground
|
6
|
M-CAN (Low)
|
12
|
Ground
|
Head Up Display (HUD) Unit Removal and Installation
| 1. |
Remove the cluster.
(Refer to Instrument Cluster - "Cluster")
|
| 2. |
Disconnect the Head-Up Display (HUD) unit connector (A).
|
| 3. |
Remove the Head-Up Display (HUD) unit (A) after removing the nuts.
|
| 1. |
Install in reverse order of removal.
|
Head Up Display (HUD) Unit Adjustment
If a part of the Head-Up Display (HUD) footage is distorted or it is not at eye level with the driver a KDS can
be used to perform calibration.
| 1. |
Calibration is required
|
–
|
After replacing the head-up display unit
|
|
–
|
When the footage is distorted after replacing the windshield (double vision removal film built-in
glass)
|
|
–
|
When the HUD mounted main crash pad is removed/installed or replaced
|
|
–
|
When the image setting location of the HUD unit is not at eye level of the driver resulting in
out of focus image
|
|
| 2. |
Calibration items
No
|
Footage calibration functions
|
1
|
Horizontal rotation
|
2
|
Upward/downward
|
3
|
Slope (up / down)
|
4
|
Parallel slope
|
5
|
Vertical movement
|
6
|
Slope (left / right) calibration
|
7
|
Width calibration
|
8
|
Height calibration
|
9
|
Initialization: Return to previous status before calibration
|
|
| 3. |
Process of calibration
| (1)
|
Locate the vehicle on a flat plane for accurate adjustment.
|
| (2)
|
Make sure that there are no foreign materials on the windshield.
|
| (3)
|
Perform the "HUD Calibration" by using KDS.
(S/W Management → Head-Up Display → HUD Calibration)
|
'HUD calibration - initialization' must be performed prior to 'calibration'.
|
|
Refer to the KDS screen for operating conditions and details.
|
|
| (4)
|
When calibration is completed, start and turn off the engine and check that the footage
calibration is completed.
|
|
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Forward Collision-Avoidance Assist (FCA) (Front view camera only)
Forward Collision-Avoidance Assist (FCA) in the Kia Seltos is designed to help detect and monitor a vehicle ahead, or help detect a pedestrian or cyclist in the roadway. When the system determines that a collision risk is increasing, it may warn the driver with a warning message and audible alert, and may assist with emergency braking.
Detecting sensor
[1]: Front view camera
Refer to the image above for the detailed location of the detecting sensor.