Kia Seltos SP2 (2021-2026) Service Manual / Body Electrical System / Integrated Memory Seat (IMS)
Kia Seltos: Body Electrical System / Integrated Memory Seat (IMS)
Contents:
- On Vehicle Inspection
- Integrated Memory Seat (IMS) Unit Terminal Function
- Integrated Memory Seat (IMS) Unit Removal and Installation
- Integrated Memory Seat (IMS) Switch Terminal Function
- Integrated Memory Seat (IMS) Switch Removal and Installation
- Integrated Memory Seat (IMS) Switch Inspection
On Vehicle Inspection
| On Vehicle Inspection |
| Diagnosis with KDS |
| 1. |
The body electrical system can be more quickly diagnosed for problems with the KDS (Refer to "DTC
guide").
|
Integrated Memory Seat (IMS) Unit Terminal Function
| Connector and Terminal Function |
| Terminal |
Function |
|||
|
Connector A |
Connector B |
Connector C |
Connector D |
|
|
1 |
- |
Battery (+) |
Driver's slide switch (FWD) |
- |
|
2 |
Driver seat recline motor (FWD) |
Ground |
Driver seat recline switch (FWD) |
Driver seat lumbar switch (FWD) |
|
3 |
Driver seat height motor (Up) |
Battery (+) |
Driver seat tilt motor (up) |
- |
|
4 |
- |
- |
Driver seat height switch (Up) |
B-CAN (High) |
|
5 |
Driver seat slide motor (FWD) |
Ground |
- |
B-CAN (Low) |
|
6 |
- |
- |
- |
|
|
7 |
Driver seat recline motor (BWD) |
- |
IG 1 |
|
|
8 |
Driver seat tilt motor (Up) |
Driver seat recline limit switch (FWD) |
Battery (+) |
|
|
9 |
Driver seat tilt motor (Down) |
Driver seat recline limit switch (BWD) |
Ground |
|
|
10 |
Driver seat height motor (Down) |
Sensor power |
- |
|
|
11 |
- |
Driver seat slide switch (BWD) |
Driver seat lumbar switch (BWD) |
|
|
12 |
Driver seat slide motor (BWD) |
Driver seat recline switch (BWD) |
IMS Switch |
|
|
13 |
Driver seat tilt switch (Down) |
- |
||
|
14 |
Driver seat height switch (Down) |
Ground |
||
|
15 |
- |
- |
||
|
16 |
Driver seat slide motor (Sensor) |
- |
||
|
17 |
Driver seat recline motor (Sensor) |
|||
|
18 |
Driver seat tilt motor (Sensor) |
|||
|
19 |
Driver seat height motor (Sensor) |
|||
|
20 |
- |
|||
Integrated Memory Seat (IMS) Unit Removal and Installation
| Removal |
| 1. |
Remove the front seat assembly [Driver's seat].
(Refer to Body - "Front Seat Assembly")
|
| 2. |
Disconnect the memory Integrated Memory Seat (IMS) unit connectors (A).
|
| 3. |
Remove the memory Integrated Memory Seat (IMS) unit (A) after removing the screws.
|
| Installation |
| 1. |
Install in reverse order of removal.
|
Integrated Memory Seat (IMS) Switch Terminal Function
| Terminal Function |
|
Connector A |
Terminal |
Function |
|
|
1 |
Illumination ( + ) |
|
2 |
- |
|
|
3 |
Driver's IMS switch |
|
|
4 |
- |
|
|
5 |
Ground |
|
|
6 |
Illumination ( - ) |
Integrated Memory Seat (IMS) Switch Removal and Installation
| Removal |
| 1. |
Remove the front door trim [Driver's Side].
(Refer to Body - "Front Door Trim")
|
| 2. |
Disconnect the memory power seat switch connector (A).
|
| 3. |
Remove the memory power seat switch (A) after removing the screws.
|
| Installation |
| 1. |
Install in reverse order of removal.
|
Integrated Memory Seat (IMS) Switch Inspection
| Inspection |
| 1. |
Remove the front door trim [Driver's Side].
(Refer to Body - "Front Door Trim")
|
| 2. |
When each switch is pressed, check the continuity between integrated memory seat switch connector and
ground.
|
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Idle Stop and Go (ISG) system
The Idle Stop and Go (ISG) system in the Kia Seltos helps reduce fuel consumption by automatically turning off the engine when the vehicle is stopped, such as at a red light, stop sign, or in heavy traffic. The engine restarts automatically as soon as the required starting conditions are met, allowing the driver to continue smoothly without using the ignition switch or ENGINE START/STOP button manually.If your Kia Seltos is equipped with a sunroof, you can slide or tilt the sunroof glass using the sunroof switch located on the overhead console. This feature adds extra light and ventilation to the cabin, but it should always be operated carefully and only when conditions are safe. The sunroof can be operated only when the ignition switch or the ENGINE START/STOP button is in the ON or START position.
