Kia Seltos SP2 (2021-2026) Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm
Kia Seltos: Body Electrical System / Keyless Entry And Burglar Alarm
Contents:
Specifications
| Specification |
|
Item |
Specification |
|
Operating voltage (V) |
9 - 16 |
|
Current consumption (A) |
Maximum 3.5 |
|
Sound level (dB) |
111 ± 3 |
|
Insulation resistance (MΩ) |
Minimum 1 |
Description and Operation ➤
Removal and Installation
| Removal |
Burglar Alarm Horn
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Disconnect the burglar alarm horn connector (A).
|
| 3. |
Remove the burglar alarm horn (A) by removing the bolt.
|
| Installation |
| 1. |
Install in the reverse of the removal.
|
Inspection
| Inspection |
| 1. |
Apply battery voltage to terminal 1 (ground) and terminal 2 (battery+) and verify that it operates.
|
| 2. |
Check the fuse and relay.
|
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Fuses
The electrical system of the Kia Seltos is protected from overload damage by fuses. These fuses are designed to interrupt the circuit when excessive current is detected, helping protect wiring, electrical components, and control systems. Blade type Cartridge type Multi fuse BFT * Left side: normal, right side: blown.Kia Seltos SP2 (2021-2026) Service Manual: How does the air bag system operate?
Air bags in the Kia Seltos are activated and able to inflate only when the ENGINE START/STOP button has been turned to the ON position. The appropriate air bags inflate instantly during a serious frontal collision or side collision to help protect occupants from severe physical injury. There is no single fixed speed at which the air bags will inflate.

