Owner's library Kia Seltos Manuals Owner's manual pages, service notes, maintenance references and practical Kia Seltos help in one clean library.

Kia Seltos reference pages

Manuals, maintenance notes and quick owner help.

Find Kia Seltos operating instructions, warning light explanations, service information and owner guidance without digging through a full PDF.

Kia Seltos: Restraint / Seat Belt System

Contents:

On Vehicle Inspection

On Vehicle Inspection
Diagnosis with KDS
1.
The airbag system can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
(1)
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
Information    
Refer to the KDS screen for operating conditions and details.

Seat Belt Pretensioner (BPT) Description and Operation

Description
When a front or side collision, or rollover accident occurs, the seat Belt Pretensioner (BPT) winds the seat belt and prevents the driver's and front passenger's body from being leaned forward and collided with the interior parts of the vehicle.
Warning    
Direct measuring the resistance of the seat Belt Pretensioner (BPT) module is very dangerous as it can cause the seat Belt Pretensioner (BPT) to deploy.

Seat Belt Pretensioner (BPT) Troubleshooting

Troubleshooting

Restraint — Seat Belt System / Seat Belt Pretensioner (BPT) / Troubleshooting illustration

Seat Belt Pretensioner (BPT) On Vehicle Inspection

On Vehicle Inspection
1.
The airbag system can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
(1)
Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
Information    
Refer to the KDS screen for operating conditions and details.

Seat Belt Pretensioner (BPT) Removal and Installation

Removal
Front Seat Belt Pretensioner (BPT)
Note    
After a collision, the seat belt is performs operation check and fault diagnosis, and when a problem occurs, a new product is replaced.
1.
Disconnect the battery negative ( - ) terminal.
Note    
After disconnecting the battery negative ( - ) terminal, wait at least 3 minutes and 30 seconds.
2.
Remove the center pillar upper trim.
(Refer to Body - "Center Pillar Trim")
3.
Disconnect the front seat belt pretensioner connector (A).

Restraint — Seat Belt System / Seat Belt Pretensioner (BPT) / Removal and Installation / Removal illustration

4.
Remove the front seat belt (A) after removing the upper anchor bolt.

Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

Restraint — Seat Belt System / Seat Belt Pretensioner (BPT) / Removal and Installation / Removal illustration

5.
Remove the front seat belt pretensioner (A) after removing the bolts.

Tightening torque
Bolt (M6) : 7.8 - 11.8 N.m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb-ft)
Bolt (7/16 inch) : 39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

Restraint — Seat Belt System / Seat Belt Pretensioner (BPT) / Removal and Installation / Removal illustration

Rear Seat Belt Pretensioner (BPT)
Note    
After a collision, the seat belt is performs operation check and fault diagnosis, and when a problem occurs, a new product is replaced.
1.
Disconnect the battery negative ( - ) terminal.
Note    
After disconnecting the battery negative ( - ) terminal, wait at least 3 minutes and 30 seconds.
2.
Remove the luggage side trim.
(Refer to Body - "Luggage Side Trim")
3.
Disconnect the rear seat belt pretensioner connector (A).

Restraint — Seat Belt System / Seat Belt Pretensioner (BPT) / Removal and Installation / Removal illustration

4.
Remove the rear seat belt (A) after removing the upper anchor bolt.

Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

Restraint — Seat Belt System / Seat Belt Pretensioner (BPT) / Removal and Installation / Removal illustration

5.
Remove the rear seat belt pretensioner (A) after removing the bolts.

Tightening torque
Bolt (M6) : 7.8 - 11.8 N.m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb-ft)
Bolt (7/16 inch) : 39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

Restraint — Seat Belt System / Seat Belt Pretensioner (BPT) / Removal and Installation / Removal illustration

Rear Center Seat Belt
Note    
After a collision, the seat belt is performs operation check and fault diagnosis, and when a problem occurs, a new product is replaced.
1.
Remove the rear seat back assembly from the rear seat back frame.
(Refer to Body - "Rear Seat Back Cover")
2.
Remove the rear center seat belt (A) after removing the nut.

Restraint — Seat Belt System / Seat Belt Pretensioner (BPT) / Removal and Installation / Removal illustration

Installation
1.
Install in reverse order of removal.
Note    
Be sure to keep the torque specifications presented in shop manuals. Otherwise, it could lead to the malfunction of airbag system.

Height Adjust Removal and Installation

Removal
1.
Remove the center pillar upper trim.
(Refer to Body - "Center Pillar Trim")
2.
Remove the front seat belt (A) after removing the upper anchor bolt.

Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

Restraint — Seat Belt System / Height Adjust / Removal and Installation / Removal illustration

3.
Remove the height adjust (A) after removing the bolts.

Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

Restraint — Seat Belt System / Height Adjust / Removal and Installation / Removal illustration

Installation
1.
Install in reverse order of removal.

Seat Belt Reminder Removal and Installation

Removal
Front Seat Belt Buckle
1.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
2.
Remove the wiring mounting clip (A).

Restraint — Seat Belt System / Seat Belt Reminder / Removal and Installation / Removal illustration

3.
Remove the front seat belt buckle (A) after removing the screw and clip (B).

Tightening torque :
39.2 - 53.9 N·m (4 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

Restraint — Seat Belt System / Seat Belt Reminder / Removal and Installation / Removal illustration

Rear Seat Belt Buckle
1.
Remove the rear seat cushion assembly.
(Refer to Body - "Rear Seat Assembly")
2.
Disconnect the rear seat belt buckle connector (A).
[LH]

Restraint — Seat Belt System / Seat Belt Reminder / Removal and Installation / Removal illustration

[RH]

Restraint — Seat Belt System / Seat Belt Reminder / Removal and Installation / Removal illustration

3.
Remove the rear seat belt buckle (A) after removing the bolt.

Tightening torque :
39.2 - 53.9 N·m (4 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

[LH]

Restraint — Seat Belt System / Seat Belt Reminder / Removal and Installation / Removal illustration

[RH]

Restraint — Seat Belt System / Seat Belt Reminder / Removal and Installation / Removal illustration

Installation
1.
Install in reverse order of removal.

Other information:

Kia Seltos SP2 (2021-2026) Service Manual: Troubleshooting

Troubleshooting Failure Diagnosis 1. In principle, ESC and TCS controls are prohibited in case of ABS failure. 2. When ESC or TCS fails, only the failed system control is prohibited. 3.

Kia Seltos SP2 (2021-2026) Service Manual: If you have a flat tire (with spare tire)

If your Kia Seltos has a flat tire, it may be replaced with the spare tire by using the supplied tools. Always park the vehicle safely before beginning any tire change procedure. WARNING Driving the Kia Seltos on a flat tire can permanently damage the tire. Re-inflating a tire that has been driven while severely underinflated or completely flat may cause a blowout and could lead to a serious crash.