Kia Seltos SP2 (2021-2026) Service Manual / Body Electrical System / Electro Chromic Inside Rear View Mirror
Kia Seltos: Body Electrical System / Electro Chromic Inside Rear View Mirror
Contents:
Description and Operation
| Description |
Electro Chromic Inside Rear View Mirror
| 1. |
The ECM (Electro Chromatic inside rear view Mirror) automatically dims to protect the driver’s eyes when
it senses light reflecting from the car behind.
|
| 2. |
The sensor in the mirror detects the brightness and if the headlight from the car behind is reflected on
the mirror, the chemical layer inside the mirror reacts to glare and adjusts the reflectivity from 10 to
70%.
|
| 3. |
When switching to the reverse gear, the mirror becomes bright regardless of the surrounding.
|
| 4. |
The ECM (A) receives voltage, ground and reverse gear signals measure the glaring intensity.
|
Terminal Function
| Connector and Terminal Function |
|
Connector A |
Terminal |
Function |
Terminal |
Function |
|
|
1 |
- |
6 |
- |
|
2 |
- |
7 |
- |
|
|
3 |
- |
8 |
Ground |
|
|
4 |
- |
9 |
Back-up lamp signal |
|
|
5 |
- |
10 |
IG 1 |
On Vehicle Inspection
| On Vehicle Inspection |
Inspect by the procedure below to see if the function of the ECM is normal.
| 1. |
After IG ON, using cloth cover the forward sensor.
|
| 2. |
It illuminates the rear sensor.
|
| 3. |
The ECM dims as soon as the rearward-facing sensor detects a certain level of brightness.
|
| 4. |
In the reverse gear, the ECM should not dim.
|
| 5. |
ECM should not darken when light is illuminated on the front and rear sensors, respectively.
|
Removal and Installation
| Removal |
| 1. |
Disconnect the negative ( - ) battery terminal.
|
| 2. |
Remove the multi sensor blanking cover (A).
|
| 3. |
Remove the multi sensor cover (A) in the direction of the arrow.
|
| 4. |
Disconnect the inside rear view mirror connector (A).
|
| 5. |
Remove the inside rear view mirror (A) after removing the screw.
|
| Installation |
| 1. |
Install in reverse order of removal.
|
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Care of seat belts
Seat belt systems in the Kia Seltos should never be disassembled, modified, or repaired by the owner. Always make sure the belt webbing, buckles, latches, anchors, and related hardware are not damaged by seat hinges, doors, sharp objects, or improper use. WARNING Pinched seat belt When returning the rear seatback to its upright position, make sure the seat belt webbing and buckle do not become caught or pinched.Kia Seltos SP2 (2021-2026) Service Manual: Idle Stop and Go (ISG) system
The Idle Stop and Go (ISG) system in the Kia Seltos helps reduce fuel consumption by automatically turning off the engine when the vehicle is stopped, such as at a red light, stop sign, or in heavy traffic. The engine restarts automatically as soon as the required starting conditions are met, allowing the driver to continue smoothly without using the ignition switch or ENGINE START/STOP button manually.

