Kia Seltos SP2 (2021-2026) Service Manual / Brake System / Parking Brake System / Electronic Parking Brake (EPB) Description and Operation
Kia Seltos: Parking Brake System / Electronic Parking Brake (EPB) Description and Operation
| Description |
The Electric Parking Brake (EPB) is a parking brake system that operates the actuators of each caliper using an
electrical signal via button operation, unlike a parking brake operated by a lever or pedal.
The EPB has the function to engage the parking brake when the vehicle is stationary, to assist in braking in
emergencies due to brake failure, and to engage the parking brake automatically when the engine off.
EPB Main function
| 1. |
Static Apply
It is a function of manually engaging the parking brake by pulling the EPB switch while the vehicle is
stationary, the brake warning lamp is illuminated on the instrument panel.
|
| 2. |
Reduced Clamp Force on Flat (RCF)
The EPB operates with different forces depending on the slope. If the driver operates the EPB switch for
more than 3 seconds, it is operated with full force.
|
| 3. |
Static Release
The park brake can be released by manually pressing the EPB switch.
However, the conditions below must be met.
The parking brake cannot be released when the ignition is switched off.
|
| 4. |
Drive Away Release (DAR)
The parking brake can be automatically released by pressing the accelerator pedal slowly if all of the
following conditions are met:
|
| 5. |
Electric Controlled Deceleration (ECD)
When the driver operates the EPB switch while driving, the vehicle decelerates by transmitting a signal
to the ESC. (used in emergency situations such as brake system failure). The system uses ESC hydraulic
brakes, not EPB actuators.
|
| 6. |
Rear Wheel Unlocker (RWU)
|
| 7. |
Key Off Apply (KOA)
|
| 8. |
Roll Away Reclamp (RAR)
|
| 9. |
High Temperature Reclamp (HTR)
|
| 10. |
External Apply / Release (EAR)
|
| 11. |
Pad Change Mode
|
Emergency parking brake release (manual)
This is a method of operation for manually releasing the park brake emergency when the EPB is not applied.
This is the last method used when it is impossible to release by KDS or electrical means due to direct damage to
the actuator or EPB, or open power wires.
The work must be done in a flat and safe place and when the parking brake is released, it must be done
safely to prevent the vehicle from moving.
|
| 1. |
Remove the screw (A) of the rear caliper installed to the vehicle.
|
| 2. |
Using the tool used for screw removal, manually release the parking brake by turning the spindle (B) 0.5
to 1 time.
|
Auto hold
It is a function that remains stationary even when the vehicle is released from the brake pedal after pressing
the brake pedal in shift lever D/N or sport mode. If the driver presses the accelerator pedal in D or sports mode,
the parking brake status is automatically released and the vehicle can be started.
Auto hold does not work under the following conditions :
| – |
Engine hood open
|
| – |
EPB operating
|
| – |
Shift lever on 'P'
|
| – |
Tail gate open
|
In the auto hold (green light), the following conditions occur and are switched to the parking brake (EPB
actuation) for safety purposes: The "AUTO HOLD" indicator changes from green to white, and the red brake warning
lamp turns on.
| – |
Engine hood open
|
| – |
EPB operating
|
| – |
Shift lever on 'P'
|
| – |
Tail gate open
|
| 1. |
Setting
|
| 2. |
Release
To off the AUTO HOLD manually, push the AUTO HOLD switch while pressing the brake pedal, 'AUTO HOLD'
light will be off.
|
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Personalized Profile and Vehicle Settings
When a registered digital key is linked to a user profile, the Kia Seltos can automatically apply selected vehicle settings when that digital key is used. This may include door lock and unlock behavior with Digital Key 2 Touch and other personalized settings available through the infotainment system. User profile linking and personalization are available for up to two drivers, allowing the Kia Seltos to provide a more convenient and customized driving experience for regular users.Special Service Tool Tool Name / Number Illustration Description Oil seal installer09452 - 26100 Used for IVT transmission case and housing oil seal installation [2WD](Used with the handle) Oil seal installer09453 - 3L241 Used for IVT transmission case oil seal installation [4WD](Used with the handle) Oil seal installer09453 - 2W100 Used for IVT transmission housing oil seal installation [4WD](Used with the handle) Handle09231 - H1100 Used with the oil seal installer Installation 1.

