Kia Seltos SP2 (2021-2026) Service Manual / Body Electrical System / Immobilizer System
Kia Seltos: Body Electrical System / Immobilizer System
Contents:
- Description and Operation
- On Vehicle Inspection
- Immobilizer Control Unit Removal and Installation
- Antenna Coil Removal and Installation
Description and Operation
| Description and Operation |
| • |
The immobilizer system prevents vehicle theft by keeping the engine from starting without a registered
key.
|
| • |
The engine starts only when the codes of ECM (Engine Control Module), IBU (Integrated Body Control Unit)
and smart key are identical. If the key is not the genuine key for the vehicle, the fuel supply is cut off
and the engine does not start.
|
If the vehicle with the immobilizer is installed with a wireless remote-start system, it can cause the
vehicle system malfunction and the anti-theft system can not operate.
|
Transponder(TP) – IMMO_IBU Communication

Vehicle Entry and Engine Control Procedure
| • |
Control Procedure During Vehicle Access
|
| 1. |
If the driver carries the smart key and accesses the vehicle door, the smart key receives LF signals from
the LF antenna and then sends RF signals to RF antenna.
|
| 2. |
The RF antenna sends the RF signals to the IBU (Integrated Body Control Unit).
|
| 3. |
After receiving the signals, if the key data matches, the IBU signals the ICU (Integrated Central Control
Unit) to release the door lock.
|
| 4. |
The ICU controls the door lock actuator depending on the door unlock signal of the IBU to unlock the
door.
|
| • |
Control Procedure During Engine Start After Vehicle Entry
|
| 1. |
When the driver presses the brake pedal and the engine start button, the start and brake signals are sent
to the IBU (Integrated Body Control Unit) and the IBU operates the LF antenna.
|
| 2. |
The LF antenna sends key data LF signals. The smart key receives the LF signals and then sends the RF
signals to the RF antenna.
|
| 3. |
The RF antenna sends the RF signals to the IBU, and the IBU starts K-Line (Immobilizer) communication
with the ECM (Engine Control Module).
|
| 4. |
The IBU authenticates through the K-Line (Immobilizer) communication with the ECM. If the data matches,
the engine starts.
|
Key Registration Procedure: SMK(FOB Key) & Non SMK(Folding Key)
SMK(FOB Key)

Non SMK(Folding Key)

|
On Vehicle Inspection
| On Vehicle Inspection |
| Diagnosis with KDS |
| 1. |
The immobilizer system can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
|
Immobilizer Control Unit Removal and Installation
| Removal |
| 1. |
Remove the Integrated Body Control Unit (IBU).
(Refer to Integrated Body Control Unit (IBU) - "Removal and
Installation")
|
| Installation |
| 1. |
Install in reverse order of removal.
|
Antenna Coil Removal and Installation
| Removal |
| 1. |
Remove the steering column shroud panel.
(Refer to Body - "Steering Column Shroud Panel")
|
| 2. |
Remove the antenna coil (A) by removing the screws after disconnecting the coil antenna connector (B).
|
| Installation |
| 1. |
Install in reverse order of removal.
|
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Highway Driving Assist (HDA)
Highway Driving Assist (HDA) in the Kia Seltos is designed to help detect vehicles and lane markings ahead. When operating on supported highways, it can help maintain distance from the vehicle ahead, maintain the set speed, and help keep the Kia Seltos centered in the lane. NOTICE HDA is available only on controlled-access roads of certain highways.Kia Seltos SP2 (2021-2026) Service Manual: Infotainment system vehicle settings
Vehicle Settings in the Kia Seltos infotainment system provide user options for adjusting door lock and unlock behavior, convenience features, driver assistance functions, display preferences, and other vehicle settings. Available menus may vary depending on trim level and equipment. WARNING Do not operate the Vehicle Settings menu while driving.


