Kia Seltos SP2 (2021-2026) Service Manual / Body Electrical System / Multifunction Switch
Kia Seltos: Body Electrical System / Multifunction Switch
Contents:
Specification
| Specification |
|
Item |
Rated Voltage (V) |
|
Front fog lamp switch |
5 |
|
Front lighting switch |
|
|
Dimmer & Passing |
|
|
Turn signal lamp |
|
|
Wiper |
|
|
Washer |
12 |
Terminal Function
| Connector and Terminal Function |
| Connector A |
|
|
Terminal |
Function |
|
1 |
Front wiper switch |
|
2 |
Front wiper switch back-up signal (Low) |
|
3 |
- |
|
4 |
Rear washer motor switch |
|
5 |
Turn signal switch (RH) |
|
6 |
Front washer motor switch |
|
7 |
Front wiper INT volume signal |
|
8 |
IG2 |
|
9 |
Ground (Vehicle) |
|
10 |
Fog lamp switch |
|
11 |
Ground (IBU) |
|
12 |
Turn signal switch (LH) |
|
13 |
Dimmer/Passing switch |
|
14 |
Front lighting switch |
|
15 |
Headlamp low back up signal |
|
16 |
Rear wiper switch |
Removal and Installation
| Removal |
| 1. |
Remove the clock spring.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock
Spring")
|
| 2. |
Disconnect the multifunction switch connector (A).
|
| 3. |
Remove the multifunction switch assembly (A) after removing the screws.
|
| Installation |
| 1. |
Install in reverse order of removal.
|
Inspection
| Inspection |
Component Inspection
| 1. |
Check for continuity between the terminals in each switch position as shown below.
|
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Personalized Profile and Vehicle Settings
When a registered digital key is linked to a user profile, the Kia Seltos can automatically apply selected vehicle settings when that digital key is used. This may include door lock and unlock behavior with Digital Key 2 Touch and other personalized settings available through the infotainment system. User profile linking and personalization are available for up to two drivers, allowing the Kia Seltos to provide a more convenient and customized driving experience for regular users.Light bulbs are installed in various areas of the Kia Seltos to provide exterior lighting, interior illumination, and visual signals for other drivers. Properly working lamps help improve visibility, safety, and communication on the road. Bulb replacement precaution Keep spare bulbs with the correct wattage rating available in case replacement is needed during an emergency.


