Owner's library Kia Seltos Manuals Owner's manual pages, service notes, maintenance references and practical Kia Seltos help in one clean library.

Kia Seltos reference pages

Manuals, maintenance notes and quick owner help.

Find Kia Seltos operating instructions, warning light explanations, service information and owner guidance without digging through a full PDF.

Kia Seltos: Body Electrical System / Seat Electrical

Contents:

On Vehicle Inspection

On Vehicle Inspection
Diagnosis with KDS
1.
The seat electrical can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
(1)
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
(2)
S/W Management : Controlling other features including system option setting and zero point adjustment.
(S/W Management → Power Seat Module → Seat Limit Position Setting)
Information    
Refer to the KDS screen for operating conditions and details.
Self - Diagnosis Mode (Heater/Ventilation)
1.
Press and hold the seat heater switch for more than 3 seconds.
2.
Release the hand and press the switch again within 3 seconds for 1.5 to 3 seconds.
3.
Again within 3 seconds, hold the switch for more than 3 seconds to enter the self - diagnosis mode.
Information    
–
When entering the self - diagnostic mode, the switch indicator blinks once.
–
Check the details of the fault according to the blinking and lighting status of the indicator after entering the self - diagnosis mode.

Heater/Ventilation Unit Troubleshooting

Troubleshooting

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Troubleshooting illustration

Heater/Ventilation Unit Terminal Function

Connector and Terminal Function
Front Seat Heater Unit

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Terminal Function / Connector and Terminal Function illustration

Connector A
Terminal
Function
Terminal
Function
1
Battery ( + )
15
Battery ( + )
2
Driver seat heater power ( + )
16
Passenger seat heater power ( + )
3
IG 1
17
-
4
B-CAN (Low)
18
-
5
B-CAN (High)
19
-
6
-
20
-
7
Driver's seat heater switch IND (High)
21
Passenger seat heater switch IND (High)
8
Driver's seat heater switch IND (Mid)
22
Passenger seat heater switch IND (Mid)
9
Driver's seat heater switch IND (Low)
23
Passenger seat heater switch IND (Low)
10
Driver's seat heater switch
24
Passenger seat heater switch
11
Driver seat heater NTC ( + )
25
Passenger seat heater NTC ( + )
12
Driver seat heater NTC ( - )
26
Passenger seat heater NTC ( - )
13
Driver seat heater power ( - )
27
Passenger seat heater power ( - )
14
Ground
28
Ground

Front Seat Heater/Ventilation Unit

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Terminal Function / Connector and Terminal Function illustration

Terminal
Function
Connector A
Connector B
Connector C
1
Driver seat ventilation switch
Driver's seat heater switch IND (Mid)
Driver seat cushion heater power
2
Passenger seat ventilation switch
Passenger seat heater switch IND (High)
Driver seat back heater power
3
Passenger seat heater switch
Driver's seat heater switch IND (Low)
Passenger seat cushion heater power
4
Driver's seat heater switch
Passenger seat heater switch IND (Low)
Passenger seat back heater power
5
B-CAN (Low)
-
Driver seat ventilation power
6
B-CAN (High)
-
Passenger seat ventilation power
7
Passenger seat blower speed
Illumination ( - )
Battery ( + )
8
Driver seat blower speed
-
Driver seat heater power ( - )
9
Driver's seat heater switch IND (High)
Detent
Ground
10
Driver's seat ventilation switch IND (High)
IG 1
Passenger seat heater power ( - )
11
Passenger seat heater switch IND (Mid)
Driver's seat ventilation switch IND (Mid)

12
Passenger seat ventilation switch IND (Mid)
Passenger seat ventilation switch IND (High)
13

Driver's seat ventilation switch IND (Low)
14
Passenger seat ventilation switch IND (Low)
15
-
16
-
17
NTC ( - )
18
Passenger seat NCT ( + )
19
Driver seat NTC ( + )
20
-

Rear Seat Heater Unit

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Terminal Function / Connector and Terminal Function illustration

Terminal
Function
Terminal
Function
1
Battery ( + )
15
Battery ( + )
2
Rear seat heater power ( + )_LH
16
Rear seat heater power ( + )_RH
3
IG 1
17
-
4
B-CAN (Low)
18
-
5
B-CAN (High)
19
-
6
-
20
-
7
Rear seat heater IND (High)_LH
21
Rear seat heater IND (High)_RH
8
-
22
-
9
Rear seat heater IND (Low)_LH
23
Rear seat heater IND (Low)_RH
10
Rear seat heater switch_LH
24
Rear seat heater switch_RH
11
Rear seat heater NTC ( + )_LH
25
Rear seat heater NTC ( + )_RH
12
Rear seat heater NTC ( - )_LH
26
Rear seat heater NTC ( - )_RH
13
Rear seat heater power ( - )_LH
27
Rear seat heater power ( - )_RH
14
Ground
28
Ground

Heater/Ventilation Unit Removal and Installation

Removal
Heater / Ventilation Unit
[Front Seat]
1.
Remove the front seat assembly [Passenger's seat].
(Refer to Body - "Front Seat Assembly")
2.
Disconnect the Occupant Detective Sensor Unit (ODU) connector (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

3.
Remove the seat heater/ventilation unit bracket (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

4.
Disconnect the heater/ventilation unit connectors (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

5.
Remove the seat heater/ventilation unit (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

[Rear Seat]
1.
Remove the rear seat cushion assembly.
(Refer to Body - "Rear Seat Assembly")
2.
Disconnect the seat heater unit connector (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

3.
Remove the seat heater unit (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

Ventilation Seat Blower
1.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
2.
Remove the seat back ventilation duct (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

3.
Remove the ventilation seat blower.
(1)
Disconnect the ventilation seat blower connector (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

(2)
Remove the fixing clips (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

(3)
Remove the ventilation seat blower (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Removal and Installation / Removal illustration

Seat Heater Pad
Front Seat Cushion
1.
Remove the front seat cushion cover.
(Refer to Body - "Front Seat Cushion Cover" )
Note    
When replacing the front seat cushion heater pad, replace the front seat cushion pad assembly.
Front Seat Back Cover
1.
Remove the front seat back cover.
(Refer to Body - "Front Seat Back Cover")
Note    
When replacing the front seat back heater pad, replace the front seat back pad assembly.
Rear Seat Cushion Cover
1.
Remove the rear seat cushion cover.
(Refer to Body - "Rear Seat Cushion Cover")
Note    
When replacing the rear seat cushion heater pad, replace the rear seat cushion pad assembly.
Installation
1.
Install in reverse order of removal.

Heater/Ventilation Unit Inspection

Inspection
Connector Resistance Measurement
[Heater Type]
Specification
4 pin (Seat cushion heater)
4 pin (NTC)
2 pin (Seat back heater)
Terminal
1 - 4
2 - 3
1 - 2
Position

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Inspection illustration

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Inspection illustration

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Inspection illustration

Resistance
2.85 - 3.17 kΩ
At 25 °C (77 °F) 7.6 - 8.4 kΩ
3.27 - 4.00 kΩ

[Heater + Ventilation Type]
Specification
6 Pins (Cushion heater)
6 Pins (NTC)
2 pin (Seat back heater)
Terminal
4 - 6
1 - 3
1 - 2
Position

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Inspection illustration

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Inspection illustration

Body Electrical System — Seat Electrical / Heater/Ventilation Unit / Inspection illustration

Resistance
4.33 - 5.3 kΩ
At 25 °C (77 °F) 7.6 - 8.4 kΩ
3.94 - 4.82 kΩ

Heater/Ventilation Switch Description and Operation

Description
Heater Seat Smart Control Technology
•
To prevent low temperature burn, seat heater temperature will automatically be lowered after a certain period of time.
(Low temperature burn condition: Over 30 minutes at 50°C (122°F))
Heater Seat Smart Control Operation
[Front Seat / Rear Seat]
•
Change to "MID" after 30 minutes in "HIGH", then "LOW" after 60 minutes in "MID"
•
Change to "LOW" after 60 minutes in "MID"

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Description and Operation / Description illustration

Information    
•
If temperature is raised manually within certain period of time after the temperature was lowered automatically, it will be lowered again soon to prevent overheating or low temperature burn.
•
This is normal operating condition as a safety device.

Heater/Ventilation Switch Terminal Function

Terminal Function
Front Seat
[SBC Type]

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Terminal Function illustration

[Driver's Side]
Terminal
Function
Terminal
Function
1
-
13
Illumination ( + )
2
IG 1
14
-
3
Driver's seat vent switch (input)
15
-
4
Driver's seat heater switch IND (High)
16
Steering wheel heated switch (Input)
5
Driver's seat heater switch IND (Mid)
17
Steering wheel heated switch IND
6
Driver's seat heater switch IND (Low)
18
SVM switch input
7
-
19
Grip control IND
8
Driver's seat vent switch (input)
20
Grip control switch ( + )
9
Driver's seat ventilation switch IND (High)
21
Grip control switch ( - )
10
Driver's seat ventilation switch IND (Mid)
22
-
11
Driver's seat ventilation switch IND (Low)
23
Detent
12
Ground
24
Illumination ( - )

[Passenger's side]
Terminal
Function
Terminal
Function
1
-
15
-
2
-
16
-
3
Passenger seat heater switch (Input)
17
PDW switch (Input)
4
Passenger seat heater switch IND (High)
18
DBC switch (Input)
5
Passenger seat heater switch IND (Mid)
19
AWD Lock switch input
6
Passenger seat heater switch IND (Low)
20
-
7
-
21
PDW switch IND
8
Passenger seat ventilation switch (Input)
22
-
9
Passenger seat ventilation switch IND (High)
23
-
10
Passenger seat ventilation switch IND (Mid)
24
-
11
Passenger seat ventilation switch IND (Low)
25
Illumination ( + )
12
-
26
-
13
-
27
-
14
Ground
28
Illumination ( - )

[SBW Type]

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Terminal Function illustration

[Driver's Side]
Terminal
Function
Terminal
Function
1
Driver's seat heater switch (Input)
9
Steering wheel heated switch (Input)
2
Driver's seat heater switch IND (High)
10
Steering wheel heated switch IND
3
Driver's seat heater switch IND (Mid)
11
DBC Switch
4
Driver's seat heater switch IND (Low)
12
-
5
Driver's seat ventilation switch (Input)
13
Illumination ( - )
6
Driver's seat ventilation switch IND (High)
14
-
7
Driver's seat ventilation switch IND (Mid)
15
Illumination ( + )
8
Driver's seat ventilation switch IND (Low)
16
Ground

[Passenger's side]
Terminal
Function
Terminal
Function
1
Passenger seat heater switch (Input)
11
PDW switch (Input)
2
Passenger seat heater switch IND (High)
12
RVM switch (Input)
3
Passenger seat heater switch IND (Mid)
13
AWD lock switch (Input)
4
Passenger seat heater switch IND (Low)
14
-
5
Passenger seat ventilation switch (Input)
15
PDW switch IND
6
Passenger seat ventilation switch IND (High)
16
-
7
Passenger seat ventilation switch IND (Mid)
17
-
8
Passenger seat ventilation switch IND (Low)
18
Illumination ( + )
9
-
19
-
10
Ground
20
Illumination ( - )

[Rear Seat]

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Terminal Function illustration

Terminal
Function
Terminal
Function
1
Battery (+)
7
Power window main switch (Down)
2
Rear seat heater IND (High)
8
Ground
3
Rear power window motor (Up)
9
-
4
Rear seat heater IND (Low)
10
Power window main switch (Up)
5
Rear power window motor (Down)
11
Illumination ( + )
6
Rear seat heater switch signal
12
Power window main switch (Window lock)

Heater/Ventilation Switch Removal and Installation

Removal
Front Seat
[SBW Type]
[Driver's Side]
1.
Remove the console upper cover.
(Refer to Body - "Console Upper Cover")
2.
Remove the console lower cover (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

3.
Disconnect the driver's seat heater/ventilation switch connector (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

4.
Remove the driver's seat heater/ventilation switch (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

[Passenger's Side]
1.
Remove the console upper cover.
(Refer to Body - "Console Upper Cover")
2.
Remove the console lower cover (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

3.
Disconnect the driver's seat heater/ventilation switch connector (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

Information    
Clip position :

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

4.
Remove the driver's seat heater/ventilation switch (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

[SBC Type]
[Driver's Side]
1.
Remove the console upper cover.
(Refer to Body - "Console Upper Cover")
2.
Remove the console lower cover (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

3.
Disconnect the driver's seat heater/ventilation switch connector (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

Information    
Clip position :

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

4.
Remove the driver's seat heater/ventilation switch (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

[Passenger's Side]
1.
Remove the console upper cover.
(Refer to Body - "Console Upper Cover")
2.
Remove the console lower cover (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

3.
Disconnect the passenger's seat heater/ventilation switch connector (A).

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

4.
Remove the passenger's seat heater/ventilation switch (A) after removing the screws.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Removal and Installation / Removal illustration

Rear Seat
1.
Remove the rear power window switch.
(Refer to Power Window - "Power Window Switch" )
Installation
1.
Install in reverse order of removal.

Heater/Ventilation Switch Inspection

Inspection
Front Seat
[Heater Type]
1.
Remove the console upper cover.
(Refer to Body - "Console Upper Cover")
2.
Push and hold the switch, check for continuity between signal terminal and ground terminal.
[Driver's Side]

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Inspection illustration

[Passenger's Side]

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Inspection illustration

Position
Terminal
Function
Switch ON
Switch OFF
Driver side
1 - 16
Continuity
-
Passenger side
1 - 10
Continuity
-

Rear Seat
1.
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
2.
Push and hold the switch, check for continuity between signal terminal and ground terminal.

Body Electrical System — Seat Electrical / Heater/Ventilation Switch / Inspection illustration

Terminal
Function
Switch ON
Switch OFF
6 - 8
Continuity
-

Power Seat Control Switch Removal and Installation

Removal
Front Seat
1.
Remove the front seat shield outer cover.
(Refer to Body - "Front Seat Shield Outer Cover")
2.
Remove the power seat control switch knob (A).

Body Electrical System — Seat Electrical / Power Seat Control Switch / Removal and Installation / Removal illustration

3.
Remove the power seat control switch assembly (A) after removing the screws.

Body Electrical System — Seat Electrical / Power Seat Control Switch / Removal and Installation / Removal illustration

Installation
1.
Install in reverse order of removal.

Other information:

Kia Seltos SP2 (2021-2026) Service Manual: Battery

The battery supplies electrical power for starting the engine and supports many electrical devices installed in the Kia Seltos. Keeping the battery in good condition helps ensure reliable starting and stable electrical system operation. For best battery service Keep the battery securely mounted. Keep the top of the battery clean and dry.

Kia Seltos SP2 (2021-2026) Service Manual: Troubleshooting

Troubleshooting Failure Diagnosis 1. In principle, ESC and TCS controls are prohibited in case of ABS failure. 2. When ESC or TCS fails, only the failed system control is prohibited. 3.