Kia Seltos: Body Electrical System / Sunroof
Contents:
Sunroof Switch Terminal Function
| Connector and Terminal Function |
|
Connector A |
Terminal |
Function |
|
|
1 |
Ground |
|
2 |
- |
|
|
3 |
- |
|
|
4 |
Sunroof switch (Open) |
|
|
5 |
Sunroof switch (Close) |
|
|
6 |
Sunroof switch (Tilt up) |
Sunroof Switch Replacement
| Replacement |
| 1. |
If the sunroof switch needs to be replaced, replace the overhead console lamp assembly.
(Refer to Lighting System - "Overhead Console Lamp")
|
| 2. |
Install in reverse order of removal.
|
Sunroof Switch Inspection
| Inspection |
| 1. |
Remove the overhead console lamp.
(Refer to Lighting System - "Overhead Console Lamp")
|
| 2. |
Check for continuity between the terminals in each switch position according to the table. If there is no
continuity, replace the overhead console lamp assembly.
|
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Blind-Spot Collision-Avoidance Assist (BCA)
Blind-Spot Collision-Avoidance Assist (BCA) in the Kia Seltos is designed to help detect and monitor vehicles approaching or traveling in the driver's blind spot area. When a possible collision risk is detected, the system may warn the driver with a warning message and an audible alert. In addition, when the Kia Seltos is driving forward out of a parking space, BCA may help reduce the risk of a collision with an approaching vehicle by applying emergency braking when necessary.Kia Seltos SP2 (2021-2026) Service Manual: General Safety Information and Caution
Precautions when repairing the SRS When repairing the SRS, pay attention to the following items. If the items below are not observed, there is a possibility of serious injury due to unexpected airbag deployment, and the airbag may not operate.

