Kia Seltos SP2 (2021-2026) Service Manual / Steering System
Kia Seltos: Steering System
Contents:
- Single-Use Parts
- Specification
- Special Service Tools
- Troubleshooting
- Inspection
- Steering Wheel
- Motor Driven Power Steering (MDPS)
Single-Use Parts
| Single-Use Parts |
Non-reusable parts (Single-Use Parts)
Workshop manual provides “Components and Components Location� which can be used to identify “Non-reusable parts�.
When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be
replaced. Kia Non-reusable parts are designed to be installed only once.
Before working on a vehicle, check “Components and Components Location� to find the non-reusable parts in a
system.
※ Symbol of Non-reusable parts
|
Symbol |
Meaning |
|
|
Do not reuse the part. Replace with a new one. |
※ Example of “Components and Components Location�

Specification ➤
Special Service Tools
| Special Service Tool |
|
Tool Name / Number |
Illustration |
Description |
|
Lower arm ball joint remover 0K545 - A9100 |
|
Used for removal of front lower arm ball joint |
|
Ball joint puller 09568 - 1S100 |
|
Used for removal of front lower arm ball joint |
Troubleshooting
| Troubleshooting |
| Excessive play in steering |
|
Suspected Cause |
Correction |
|
Loosen universal joint assembly bolt |
Retighten or replace as necessary |
|
Yoke plug got loose |
Retighten |
|
Steering gear box bolt got loose |
Retighten |
|
Tie rod end stud got loose or worn |
Retighten or replace as necessary |
| Steering wheel does not return to its original position |
|
Suspected Cause |
Correction |
|
Excessive turning resistance of tie rod end |
Replacement |
|
Yoke plug excessively tight |
Adjustment |
|
Faulty tie rod or ball joint |
Replacement |
|
Steering gear box and front sub frame got loose |
Retighten |
|
Steering column shaft or body grommet got worn |
Repair or replace |
|
Bended rack |
Replacement |
| Rattling or chucking noise in the rack and pinion |
|
Suspected Cause |
Correction |
|
Loose steering gear box mounting bolts |
Retighten |
|
Tie rod end ball joint got loose |
Retighten |
|
Tie rod or tie rod end ball joint got worn |
Replacement |
|
Loose yoke plug |
Retighten |
Inspection
| Inspection |
Steering Wheel Play Inspection
| 1. |
Align the steering wheel in a straight-ahead position using a digital level or other equivalent tools.
|
| 2. |
With MDPS power on, lightly turn the steering wheel from side to side to measure the distance the
steering wheel rotates until the wheel moves.
|
| 3. |
If the steering wheel play exceeds standard value, inspect the steering column, shaft, and linkages.
|
Checking Stationary Steering Effort
| 1. |
Align the steering wheel in a straight-ahead position using a digital level or other equivalent tools.
|
| 2. |
With MDPS powered on, apply a spring scale to the end of the steering wheel and pull the scale to measure
the force when the steering wheel begins to move.
|
| 3. |
If the measured value exceeds standard value, inspect the steering gear box or MDPS.
|
Steering Wheel Off Center Inspection
| 1. |
Mark the steering wheel upper (A) and upper cover (B) using the masking tape.
|
| 2. |
Align the steering wheel and mark the straight line (A) on the masking tape.
|
| 3. |
Keep the vehicle straight and drive about 100 m, and mark the new straight line (A) as the steering wheel
is turned.
|
| 4. |
Remove the front wheel and tires.
(Refer to Suspension System - "Wheel")
|
| 5. |
Loosen the tie rod end nut (A) enough to adjust the steering wheel off center.
|
| 6. |
Fix the tie rod end (A) with a spanner to prevent turning during adjustment.
|
| 7. |
Turn the tie rod turnbuckle (A) clockwise or counterclockwise to adjust the steering wheel off center.
[Tie rod turnbuckle rotation according to steering wheel off
center]
|
| 8. |
Tighten the tie rod end nut (A) after adjustment.
|
| 9. |
Install the front wheel and tires.
(Refer to Suspension System - "Wheel")
|
| 10. |
Check the wheel alignment.
(Refer to Suspension System - "Alignment")
|
Steering Wheel ➤
Motor Driven Power Steering (MDPS) ➤
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: General Safety Information and Caution
Precautions when repairing the SRS When repairing the SRS, pay attention to the following items. If the items below are not observed, there is a possibility of serious injury due to unexpected airbag deployment, and the airbag may not operate.Use the following information to maintain the exterior of your Kia Seltos. Keeping the exterior clean is not only visually pleasing, but also helps protect paint, trim, lamps, and body components from wear, contamination, and environmental damage. NOTICE If the Kia Seltos is parked near a stainless signboard, glass building, or other highly reflective structure, reflected sunlight may damage plastic exterior trim such as the bumper, spoiler, trim pieces, lamps, or outside mirrors.














