Kia Seltos SP2 (2021-2026) Service Manual / Heating,Ventilation And Air Conditioning
Kia Seltos: Heating,Ventilation And Air Conditioning
Contents:
- Single-Use Parts
- Specification
- Special Service Tools
- Troubleshooting
- Air conditioning System
- Heater
- Blower
- Controller
Single-Use Parts
| Single-Use Parts |
Non-reusable parts (Single-Use Parts)
Workshop manual provides “Components and Components Location� which can be used to identify “Non-reusable parts�.
When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be
replaced. Kia Non-reusable parts are designed to be installed only once.
Before working on a vehicle, check “Components and Components Location� to find the non-reusable parts in a
system.
※ Symbol of Non-reusable parts
|
Symbol |
Meaning |
|
|
Do not reuse the part. Replace with a new one. |
※ Example of “Components and Components Location�

Specification ➤
Special Service Tools
| Special Service Tool |
|
Tool Name / Number |
Illustration |
Description |
|
09977 - 3R000 Disc & hub assembly bolt stopper |
|
Used to fixing air conditioner compressor disc and hub assembly (G 2.0 MPI NU) |
|
09977 - B9100 Disc & hub assembly bolt stopper |
|
Used to fixing air conditioner compressor disc and hub assembly (G 1.6 T-GDI GAMMA II) |
Troubleshooting
| Troubleshooting |
| • |
Before replacing or repairing the air conditioner components, first check whether the cause of failure is
refrigerant charge, air flow or compressor. After repairing, make sure the system components are complete.
|
| • |
The table below lists the symptoms and the suspected parts of the failure. Replace the parts if
necessary.
|
No blower operation
|
Suspected Cause of Failure |
|
Heater fuse |
|
Blower relay & BLDC blower motor |
|
BLDC blower motor |
|
Wiring |
No air temperature control
|
Suspected Cause of Failure |
|
Engine coolant capacity |
|
Heater control assembly |
|
Faulty connection of temperature control actuator and connector |
No compressor operation
|
Suspected Cause of Failure |
|
Refrigerant amount |
|
A/C fuse |
|
Compressor |
|
A/C Pressure Transducer |
|
A/C switch |
|
Evaporator Temperature Sensor |
|
Wiring |
Not blowing cold air
|
Suspected Cause of Failure |
|
Refrigerant amount |
|
Refrigerant pressure |
|
A/C Compressor |
|
A/C Pressure Transducer |
|
Evaporator Temperature Sensor |
|
A/C switch |
|
Heater control assembly |
|
Wiring |
Insufficient cooling
|
Suspected Cause of Failure |
|
Refrigerant amount |
|
Compressor |
|
Condenser |
|
Expansion valve |
|
Evaporator |
|
Refrigerant Line |
|
A/C Pressure Transducer |
|
Heater control assembly |
Poor air inlet control
|
Suspected Cause of Failure |
|
Heater control assembly |
|
Faulty connection of Intake control actuator and connector |
No mode control
|
Suspected Cause of Failure |
|
Heater control assembly |
|
Faulty connection of mode control actuator and connector |
No cooling fan operation
|
Suspected Cause of Failure |
|
Cooling fan fuse |
|
Fan motor |
|
Engine ECU |
|
Shorted wiring & connector |
Air conditioning System ➤
Heater ➤
Blower ➤
Controller ➤
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Exterior care
Use the following information to maintain the exterior of your Kia Seltos. Keeping the exterior clean is not only visually pleasing, but also helps protect paint, trim, lamps, and body components from wear, contamination, and environmental damage. NOTICE If the Kia Seltos is parked near a stainless signboard, glass building, or other highly reflective structure, reflected sunlight may damage plastic exterior trim such as the bumper, spoiler, trim pieces, lamps, or outside mirrors.Kia Seltos SP2 (2021-2026) Service Manual: Driver Attention Warning (DAW)
Inattentive Driving Warning function Driver Attention Warning (DAW) in the Kia Seltos monitors driving patterns while the vehicle is being driven. If the system determines that the driver's attention level has dropped below a certain point, DAW may recommend taking a break to help support safer driving. Leading Vehicle Departure Alert function Leading Vehicle Departure Alert informs the driver when the detected vehicle in front begins moving away from a stop.
