Kia Seltos SP2 (2021-2026) Service Manual / All Wheel Drive (AWD) System
Kia Seltos: All Wheel Drive (AWD) System
Contents:
- Single-Use Parts
- Specification
- Special Service Tools
- Transfer Assembly
- AWD Control System
- Coupling Assembly
- Rear Driveshaft Assembly
- Propeller Shaft Assembly
- Rear Differential Carrier Assembly
Single-Use Parts
| Single-Use Parts |
Non-reusable parts (Single-Use Parts)
Workshop manual provides “Components and Components Location� which can be used to identify “Non-reusable parts�.
When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be
replaced. Kia Non-reusable parts are designed to be installed only once.
Before working on a vehicle, check “Components and Components Location� to find the non-reusable parts in a
system.
※ Symbol of Non-reusable parts
|
Symbol |
Meaning |
|
|
Do not reuse the part. Replace with a new one. |
※ Example of “Components and Components Location�

Specification ➤
Special Service Tools
| Special Service Tool |
|
Tool Name / Number |
Illustration |
Description |
|
CV joint puller 09517 - 4E000 |
|
Used for removal of CV joint |
|
Differential bearing remover 09501 - C9200 |
|
Used for removal of differential bearing |
|
Differential assembly working stand base 09501 - C9231 |
|
Used for assembling or disassembling of differential carrier assembly (Used with 0K530 - P2500, 0K501 - P2232) |
|
Rear differential working stand adapter 0K530 - P2500 |
|
Used for assembling or disassembling of differential carrier assembly (Used with 09501 - C9231, 0K501 - P2232) |
|
Sub support 0K501 - P2232 |
|
Used for assembling or disassembling of differential carrier assembly (Used with 09501 - C9231, 0K530 - P2500) |
|
Bearing remover 09501 - C9120 |
|
Used for removal of bearing (Used with 09452 - 2E000) |
|
Bearing remover (Base) 09452-2E000 |
|
Used for removal of bearing (Used with 09501 - C9120) |
|
Pinion oil seal remover 09455 - 32200 |
|
Used for removal of pinion oil seal |
|
Bearing race remover 09501 - C9140 |
|
Used for removal of bearing race |
|
Rear differential bearing installer 0K530 - P2300 |
|
Used for installing of rear differential gear bearing |
|
Rear differential bearing installer 0K530 - P2200 |
|
Used for installing of pinion drive gear bearing |
|
Pinion bearing race installer 09501 - C9150 |
|
Used for installing of pinion bearing race |
|
Pinion oil seal installer 0K530 - P2100 |
|
Used for installing of pinion oil seal (Used with 09231 - H1100) |
|
Differential oil seal installer 09501 - C9190 |
|
Used for installing of differential carrier case side oil seal (Used with 09231 - H1100) |
|
Handle 09231 - H1100 |
|
(Used with 0K530 - P2100, 09501 - C9190) |
|
Backlash measuring supporter 0K530 - P2400 |
|
Used for measuring backlash |
|
Oil seal installer 09473 - D3600 |
|
Used for installing transfer case oil seal (Used with 09231 - H1100) |
|
Handle 09231 - H1100 |
|
Used for installing transfer case oil seal (Used with 09473 - D3600) |
Transfer Assembly ➤
AWD Control System ➤
Coupling Assembly ➤
Rear Driveshaft Assembly ➤
Propeller Shaft Assembly ➤
Rear Differential Carrier Assembly ➤
Other information:
Kia Seltos SP2 (2021-2026) Service Manual: Fuel requirements
The Kia Seltos is engineered to operate on unleaded gasoline with a pump octane rating of 87 ((R+M)/2), which is equivalent to Research Octane Number 91, or higher. Methanol-blended fuels should not be used, as they can affect proper drivability and may damage important fuel-related components. For the best balance of performance, reliability, fuel economy, and emissions control, your Kia Seltos should always be filled with high-quality unleaded fuel.The battery supplies electrical power for starting the engine and supports many electrical devices installed in the Kia Seltos. Keeping the battery in good condition helps ensure reliable starting and stable electrical system operation. For best battery service Keep the battery securely mounted. Keep the top of the battery clean and dry.


















